|
|
 |
Minimax XP
Single Gas DetectorManufactured by
Honewell |
|
Extra protection from a single gas
detector…XP is making it really personal!
The Minimax XP is all about preferences. It delivers advanced,
full feature functionality, user configurability with cost
effective serviceability for a wide range of toxic gases. The
market demands more than small size and good looks in a new
generation single gas monitor. |
|
A compact and rugged design,
maintenance that´s easy while providing simple operation is
essential. With loud, ultra-bright audiovisual alarm, Minimax XP
demands attention when gas is detected. For noisy environments, a
built-in vibrating alarm is supplied as standard.
Minimax XP delivers all of the above while still ensuring
reliable, accurate readings and no false alarms from radio
frequency interference (RFI). In addition Minimax XP provides
continuous gas readings, TWA / STEL and two instantaneous alarms
with peak hold facility.
By using SureCell™ sensors with TempraSURE™ Thermal Shock
Correction and Reflex™ Sensor Protection, Minimax XP ensures
improved accuracy and reliability in adverse operating conditions.
Maintenance could not be easier. Built-in Cell Decay Compensation
extends the time between calibrations to 12 months. With typical
sensor life in excess of two years and three year battery life*,
operational costs are minimized. Batteries and sensors can be
easily replaced by the user. Alternatively, Lumidor offers a wide
range of service programs to meet our customer needs. |
|
Features:
Tough Durable Housing
Easy to Use
-
Works straight out of the box
-
Single button on/off operation
-
Intuitive icons suitable for all languages
-
User configurable via menu
-
Interactive product training guide available
Ultra Clear Backlit Display
-
Continuous reading of gas levels
-
TWA / STEL and two instantaneous alarm levels with peak hold
facility
-
Battery life, calibration and self-test status
Effective Gas Alarm Indication
-
Alarm and backlight combine to demand attention
-
Distinctive 95dB two-tone audible alarm
-
Vibrating alarm supplied as standard
Reliable Operation
-
Self-test on start up or on demand checks display, battery,
sensor, audiovisual and vibrating alarms
-
Uses patented SureCell™ and Reflex™ sensor technology and shock
protection
-
Includes TempraSURE™ thermal compensation and shock protection
-
Periodic flash and / or beep for increased confidence
Unsurpassed EMC / RFI Performance
Cost Effective
-
Fully inclusive 2 year warranty
-
Cell decay compensation enables up to 12 months between
calibrations (H2S/CO only)
-
Replaceable sensor and battery
-
Minimum 2 year sensor life
-
Typical 3 year battery life* (low battery warning)
-
Initial and on-going running costs minimized
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
 |
Minimax X4
Gas Detector
Manufactured by Honewell |
|
Minimax X4 is an unsurpassed portable gas detector for protection
against flammable, oxygen, carbon monoxide and hydrogen sulfide gas
hazards. Its ideal for use by companies wanting advanced performance,
reliablity and ease of use, without the high costs of long term maintenance.
|
|
Minimax X4 focuses on ease of use by offering only the functionality
required to comply with legislation. Everything that a user routinely has
to achieve can be done in a single button press! Keeping it simple reduces
training requirements and enables use in a wider range of industries. Ease
of use doesn’t mean basic functionality. For example, every instrument has
the capability to log data using a simple to fit memory card (the type you
get in a digital camera). Events, gas data and calibration history are all
stored and the free software downloaded from our web site enables you to
graph or print reports at the press of a button.
Convenience and the way users want to work is an important
consideration. When clipped to the belt or harness, users may want the
re-assurance of being able to view the display from different positions.
But with many other units the display is upside down forcing the user to
remove the unit to look at the display, perhaps creating a hazard. Minimax
X4 users can ´flip´ the display at the press of a button for that added
convenience and safety.
With an ultra clear backlit display, vibrating and powerful audiovisual
alarms, the Minimax X4 demands attention when gas hazards are detected in
even the most adverse working conditions. All in all, Minimax X4 offers
reliable, easy to use gas detection to keep you safe. |
|
Features: Tough Durable Housing
- Small and lightweight
- Rugged, impact and weather resistant
- Includes crocodile clip or optional belt clip
Easy to Use
- Works straight out of the box
- Single button on / off operation
- Intuitive icons suitable for all languages
- User configurable via menu
- Interactive product training guide available
Ultra Clear Backlit Display
- Unique ‘flip display’ at the press of a button
- Continuous reading of gas levels
- TWA / STEL and two instantaneous alarm levels with peak hold facility
- Battery life, calibration and self-test status
Effective Gas Alarm Indication
- Alarm and backlight combine to demand attention
- Distinctive, loud, two-tone audible alarm
- Vibrating alarm supplied as standard
Reliable Operation
- Self-test on start up or on demand checks display, battery, sensor,
audiovisual and vibrating alarms
- Uses patented SureCell™ sensor technology and Reflex™ cell check
technique
- Includes TempraSURE™ thermal compensation and shock protection
- Periodic flash and / or beep for increased confidence (user
configurable)
Unsurpassed RFI Performance
- Can be used alongside walkie-talkies or cell phones
- Exceeds the toughest industrial standards for RFI immunity
Cost Effective
- Fully inclusive 2 year warranty
- Minimum 2 year sensor life
- Initial and on-going running costs minimized
- Available in 1, 2, 3 or 4 gas versions
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
 |
Impact/Impact
Pro
Multi-Gas Detector
Manufactured by Honewell |
|
The Impact range of portable multigas monitors is able to monitor
and display up to four gases simultaneously. Using high specification
flammable, oxygen and patented Surecell™ toxic sensors, our unique cartridge
technology ensures safe, accurate and reliable measurements are always made. |
|
Available in two configurations, the Impact and Impact Pro accepts either
disposable and / or serviceable cartridges respectively, all of which are
pre-calibrated and can be replaced in under one minute - simplifying
maintenance and minimizing cost wherever possible. Compact and rugged,
these monitors are designed for tough working environments while being
small, lightweight and unobtrusive, making them ideal for use in confined
spaces where entry and exit may be difficult. Designed to work how you
want to; gas checks prior to entering a confined space can be carried out
using a drop line, hand aspirator or via an optional built-in pump (supplied
as standard on the Impact Pro) that turns on and off automatically when the
sampling tube is connected.
Ultra-bright alarm lights and a powerful audible alarm, coupled with a
periodic green flash and bleep provide user confidence that monitoring is
always in operation and alarms are never missed. For noisy environments a
vibrating alarm is included as standard on the Impact Pro. A large,
multi-lingual, backlit display, with intuitive menu system simplifies use
and minimizes operator training.
Available for use with a wide range of accessories including the unique
Enforcer calibration system and compliance-friendly Safelink communication
system, you can be sure that the Impact range of portable multigas monitors
will be ready to protect you when most needed. |
|
Which model is best for you: |
Pump - No
Cartridge - Disposable
Sensors - OFCH
Data Logging - Yes
Enforcer - OFCH only
Vibrating Alarm - No
Safelink - No |
Pump - Yes
Cartridge - Serviceable
Sensors - OFXX
Data Logging - Full
Enforcer - OFCH only
Vibrating Alarm - Yes
Safelink - Yes |
* All OFCH disposable
^ Requires base station |
|
Features: Reliable Operation
- Pre-calibrated plug-in sensor cartridge
- High specification sensors
- Patented Surecell™ toxic sensors
- Stable and accurate
Easy to Use
- One button on / off
- Multi-lingual, intuitive menu system
- On screen prompts guide user
- Built-in correction factors for flammable gases
- Minimal training required
Easy to Maintain
- Plug-in operation for all serviceable parts
- Cartridge replacement in under one minute
- Re-calibration in under two minutes when using Enforcer
- Low cost of ownership
Durable Housing
- Rugged and impact resistant
- Weatherproof to IP67
- Built for everyday use
Alarm Indication
- 3 levels of instantaneous alarm, time weighted average alarms on toxic
- Periodic confidence flash and bleep
- Increasingly rapid flashing, ultra-bright alarm LEDs
- Powerful, two tone audible alarm
User Friendly Pre-entry Check
- Peak hold function and drop line
- Hand aspiration
- Optional built-in automatic pump
- Totally flexible
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
 |
Enforcer
Calibration accessory
Manufactured by Honewell |
|
Regulations require regular testing of gas monitoring equipment to
ensure that the instrument will work as and when required. The Enforcer
Calibration Accessory allows you to easily comply with regulations when
using an Impact multigas monitor, without the need for costly test
facilities or third parties. |
|
‘Bump’ testing should be carried out before use of any portable gas
detector. This involves exposing each gas sensor to a known concentration
of target gas and ensuring that it responds correctly. If not, the unit
must be re-calibrated or serviced to replace those parts not working.
Personal gas monitors are normally calibrated every 3 to 6 months.
Typically this requires specialist knowledge and equipment that is costly,
or the work is sub-contracted to a third party. During this time,
instruments are not available for use and so could delay essential
operations or force additional monitors to be purchased.
The Enforcer calibrates Impact multigas monitors fitted with oxygen,
flammable, carbon monoxide and hydrogen sulfide sensors in less than two
minutes. Volumes and flow rates are minimized to allow approximately 200
calibrations per cylinder of gas, making calibration as low in cost as a
‘Bump’ test. Impact instruments, when used with The Enforcer, are always
available for use. Calibration results are recorded for printing at a later
date via the optional PC software, thereby ensuring that instrument
histories are always available if required. |
|
Features: Convenient to Use
- Portable design
- Lightweight and compact
- Disposable multigas cylinder
- Wall mounting bracket with security fixing included
Easy to Operate
- Simple mechanical construction
- Attach the Impact
- Instrument is automatically recognized
- Press a single button to proceed
- Wait a minute
- Impact is now tested and calibrated
- Minimal training required
Minimize Running Costs
- No need for third parties
- Reduce instrument downtime
- Simplify operations
Easy to Maintain
- Durable plastic housing
- Wipe clean surfaces
- Replaceable gaskets and seals
- Built-in indicator tells you when gas needs replacing
Maintain Records
- Calibration history recorded by instrument
- Print history via optional PC software
- Ensure compliance with regulations
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
 |
Safelink
Confined Space Communication
Manufactured by Honewell |
|
Safelink allows two Impact Pro portable multigas monitors to be
connected together such that the gas readings and instrument status from one
are repeated on the other. This allows a co-worker in a confined space to
be monitored remotely as well as providing a simple means to pass messages
back and forth. |
|
Safelink is designed to simplify compliance with confined space entry
regulations and working practices. Generally, two people are required to
carry out confined space entry procedures correctly. One, the Attendant,
must continuously monitor the status of the other Entrant and initiate
rescue procedures if necessary. When the Safelink cable is attached to the
two Impact Pro instruments the link is automatically recognized. One
instrument is configured as the Attendant and the other is automatically
designated as the Entrant; neither instrument can now be turned off.
The Attendant is prompted at regular timed intervals to send a message to
the Entrant who has to reply by pressing any button on the instrument. If
no reply is received both instruments raise alarms. Other pre-defined
messages may be configured using the optional PC software allowing a
flexible method of communication to be established. |
|
Features: Ensures Good Working Practice
- Continuous monitoring of Entrant
- Simple and reliable means of communication
- Prompts users to maintain contact
- Ensures compliance with regulations
Minimizes Risk
- Attendant always aware of Entrant status
- Help can be made more quickly available
- 'Rescuer' is aware of conditions prior to entry
Easy to Use
- Plug and play configuration
- Intuitive, multi-lingual menu system
- Single button operation
- Single button Emergency Alarm facility
- User configurable messages
Reliable
- Instruments continuously talk
- Full data integrity check eliminates false alarms
- Does not suffer from blind spots
Applications
- Gas check prior to entry
- On-going monitoring during operations
- Communications system in difficult areas
- Search and rescue
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
 |
MicroMAX+
Multi-Gas Monitor
Manufactured by Honewell |
|
The only microprocessor controlled multi-gas monitor that has it all
- easy to use, reliable, highest quality, economical, lightweight, shortest
response time and a lifetime warranty! |
|
Designed to provide personal safety, MicroMAX Plus is OSHA compliant. Its
rugged aluminum case provides superior RFI/EMI shielding as well as dust,
water and impact resistance. MicroMAX Plus is designed, tested and
manufactured under strict ISO 9001 quality systems and is UL classified with
CSA, certified intrinsically safe for use in Class I, II & III, Division I
and Groups A,B, C, D, E, F, G. Worker safety is our business, and Lumidor
continually improves its gas detectors´ quality and features. MicroMAX Plus
simultaneously monitors 1 to 4 gases (5 with ComboToxTM). Internal pump
allows for easy pre-testing in confined spaces and provides almost
instantaneous readings of gas concentrations.
Both audible and visual alarms warn the user if the oxygen levels are
either too low or enriched, and when combustible gas is present or toxic gas
levels are too high. The toxic gas alarms can be easily adjusted in the
field from immediate to TWA. Alarms will also activate in case of sensor
failure, low battery voltage, pump blockage or low air flow.
Our unique microprocessor design allows for self-diagnostics with each
start up. MicroMAX Plus internally data logs individual channel alarms, TWA,
averaging and peak information. With a push of the Mode button, review
information as well as check battery voltage and elapsed time. This
information is available for display and documentation by downloading to a
standard PC when the MicroMAX Plus is purchased with the data logging
option. Calibration is easy - simply place in calibration Mode, introduce
calibration gas, wait two minutes and calibration is complete! |
Features
- User selectable internal sampling pump / diffusion
- Non-intrusive battery compartment
- Interchangeable plug-in sensors
- Field interchangeable NIMH or alkaline batteries
- Load 90dB horn
- Hydrophobic filter
- Multi-use port (charger, earphone, vibrator, data logging)
- Dust inhibiting particulate filter (inside inlet)
- 4-line "automatic" backlit display
- Rugged RFI / EMI resistant aluminum case
- Simple one-button operation
- Easy calibration
- LED alarm indicator
- Real-time clock
- Battery status
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
 |
MicroMAX Pro
Multi-Gas Monitor
Manufactured by Honewell |
|
The MicroMAX PRO is the best microprocessor controlled multi-gas
monitor on the market today. Its the only monitor that has it all - easy to
use, reliable, highest quality, economical, lightweight, shortest response
time, built-in data logging, lifetime warranty - and now includes our newest
innovation Voice Assist! Its another monitoring feature to safeguard lives
while aiding in normal operation. |
|
Since worker safety is our business, Lumidor continually strives to improve
its gas detector product line, and has done so with the addition of the
voice message feature. Four languages (English, French, German and Spanish)
are included with each monitor - just select the desired language. Every
function, when activated, is accompanied with a voice message. Everything
from immediate warnings to simple on and off functions are communicated
verbally to the user. This feature is also very valuable in poorly lit
situations. The language displayed on the new 4-line display is the same as
the one selected for the voice. The MicroMAX Pro is designed to provide
the ultimate in personal safety. Its OSHA compliant, and has a rugged case
that provides superior RFI / EMI shielding, as well as dust, water and
impact resistance. Additionally, it is designed, tested and manufactured
under strict ISO 9001 standards, and is UL classified for use in Class I,
II, III Division I, Groups A, B, C, D, E, F, G.
Now the MicroMAX PRO combines diffusion and built-in internal sampling
pump systems for simultaneously monitoring 1 to 5 gases. The popular
internal pump allows for easy pre-testing in confined spaces and provides
almost instantaneous readings of gas concentrations. In order to save power,
the pump can be switched off and the diffusion mode will take over.
MicroMAX PRO has preset and field selectable alarms. Both audible and
visual alarms warn the user if the oxygen levels are either too low or
enriched, combustible gas is present or toxic gas levels are too high. The
toxic gas alarms can be easily adjusted in the field from immediate to TWA.
Alarms are also activated in case of sensor failure, low battery voltage,
pump blockage or low air flow.
Our unique microprocessor design allows for self diagnostics with each
start up. The MicroMAX PRO internally data logs individual channel alarms,
TWA averaging and peak information. With a push of the "Mode" button, review
information, as well as customize user settings or initiate calibration.
This information is available for display and OSHA documentation for
employee awareness programs by downloading to a standard Windows-compatible
PC with Lumidor´s MPRO-DATALOG software.
Calibration is easier than ever before - its all automatic - no tools,
screws or stopwatch required. Simply place in calibration "Mode", introduce
calibration gas and wait for voice / display indicating calibration is
complete! A NiMH rechargeable battery pack and 4-hour charger are now
included with each monitor. However the flexibility of operating the monitor
with alkaline batteries is still retained. |
Features:
-
Voice Assist speaker
-
User selectable internal sampling pump / diffusion
-
Non-intrusive battery compartment
-
Interchangeable plug-in sensors
-
Field interchangeable NIMH or alkaline batteries
-
Load 90dB horn
-
Hydrophobic filter
-
Multi-use port (charger, earphone, vibrator, data logging)
-
Dust inhibiting particulate filter (inside inlet)
-
4-line "automatic" backlit display
-
Rugged RFI / EMI resistant aluminum case
-
Simple one-button operation
-
Easy calibration
-
LED alarm indicator
-
Real-time clock
-
Battery status
|
|
Call for price and
availability! 1-800-766-4242 |
|
TOP OF PAGE |
|
|
PREVIOUS PAGE
